These days, many users are not completely satisfied with the performance of their existing home networks as they are not getting the desired speed and coverage. In case you are also amongst these people, then you should not waste any more time in bringing a Netgear wireless range extender to your home and setting it up via the mywifiext web address. To learn about how to set up the device, you should read the instructions mentioned in this article.
How to Setup Netgear Extender via Netgear_Ext?
This is the first method that can be used to configure or install the Netgear extender. In this method, the primary requirement is for you to access the web interface of the networking device.
Go through the guidelines outlined below and understand how to execute the setup process using the manual method:
- Plug in your Netgear range extender and let the power LED light turn on.
- In case the light does not turn solid, switch the device ON and OFF.
- Switch on your computer or laptop and connect it to Netgear_ext.
- Netgear_ext is the network name or SSID of your WiFi range extender.
- To connect to it, you need to enter the WiFi password when needed.
- Load an internet browser and take the cursor to the address bar.
- For your information, the address bar is also called the URL bar.
- Enter mywifiext.net or mywifiext.local.
- This needs to be done in the case of WINDOWS and MAC respectively.
- Press the Enter key in order to go to the next screen.
- The next page is called NEW EXTENDER SETUP.
- Here, you will be asked to agree to the TERMS AND CONDITIONS.
- Hit YES or I AGREE and wait for some time.
- Now you need to choose the credentials of the Netgear range extender.
- Leave the user name as ADMIN.
- Once done, choose the admin login password.
- It is recommended that you do not keep it the same as the WiFi password.
- Answer two security questions from the menu displayed in front of you.
- Hit NEXT.
- You will be asked whether you want to use the NETGEAR GENIE to help.
- Click the YES button and hold on for some time.
- In some time, your extender will start searching for local networks.
- Select the radio button for the networks and hit NEXT.
- Enter the security key and click the NEXT option again.
Soon you will be able to access the internet on your client devices, i.e. your computer, laptop, iPad, mobile device, and much more. Now, you are free to feel content with the internet speed that you are receiving.
How to Setup Netgear Extender via WPS Button?
Another method through which you can configure your networking device is by pressing the WPS or WIFI PROTECTED SETUP button. In this method, entering the WiFi password is not required.
To learn how to use it to set up your extender, it is recommended that you make your way to the steps highlighted in this section:
- Place and plug in the extender in the same room as the host router.
- Once the power LED lights up, locate the WPS button on the extender.
- Soon the WPS LED will blink or flash.
- After waiting for about two minutes, press the same button on the router.
- As soon as the lights get solid, move the extender to a new location.
It is recommended that you keep your extender at a location that is midway to the router of the area with no internet service.
Also, ensure that transmitting appliances, electronic devices, and metal objects are not kept close to the extender. Some examples include cordless phones, microwave ovens, baby monitors, washing machines, treadmills, televisions, Bluetooth speakers, refrigerators, and aluminum studs.
Conclusion
This ends the article written on how to set up the Netgear extender. We hope that after reading the instructions mentioned above, you will be able to set up your networking device with ease.
Now that you have achieved success, take our advice and change the settings of your extender using the Netgear extender login credentials. This will give a personal touch. If you are not sure about which all settings one should change, refer to the manual of your device.