D-Link router IP address facilitates the user to access the log in to the router and manage it. It means no setting of the router can be changed if you are not able to access the IP address. But, it seems that you are already facing the same trouble. Is the router’s IP address not working for you? If yes, then you ought to walk through the tips highlighted in this post so that you can complete the Dlink router login process easily.
First of All, Check the Internet Connection
The most obvious reason why you are unable to access the router’s IP address is that you are not connected to the internet. Therefore, you need to make sure that the computer on which you are trying to log in to your wireless router is connected to the Dlink router wirelessly or through a wired source.
Apart from this, you are also required to check the LAN cable connection between the D-Link WiFi router and the host gateway. It is supposed to be made with the help of an intact cable. Additionally, you need to ensure that the connection is stable and secure. And, do you know what’s more important? The connection of the correct ports of your router and modem.
Is the internet connection all good? If yes, then you are supposed to pay attention to the troubleshooting techniques mentioned below.
Solutions: D-Link Router IP Address Not Working
1. Check the IP Address Entrée
Another obvious reason why the IP address is not working for you is that you have not entered the correct IP address. Perhaps, you are not aware of the correct IP address. Thus, check out the router’s user manual and verify the correct IP address of your router. After that, input the IP address into the browser’s address bar and check if you get successful this time. And remember, the address bar means the address bar. You are not allowed to use another field to input the IP address.
2. Update the Web Browser
Updating the web browser is another technique that can help you address the D-Link router IP address not working issue. It has been observed that an outdated version of the web browser often obstructs the path to managing a networking device. Since your Dlink router is also a networking gadget, you might face issues while accessing its IP address. So, you must make your way to the browser’s settings right now and update it to resolve the issue at hand.
3. Temporarily Disable Antivirus
Sometimes, antivirus software installed on your computer might also stop you from accessing the default router IP address. Thus, you must do yourself a favor and consider disabling it on a temporary basis. You can do it by navigating to the Control Panel of your computer. However, do not forget to enable it once again after getting success with the WiFi router login process.
4. Use the Web Address
If you are still facing failures in accessing the default IP of your Dlink router, then you should waste no more time using the web address. For your information, the default web address of the router is dlinkrouter.local. So, enter the same into the address bar of the web browser. Make sure that you enter it in an error-free way. Press the Enter key and see if you are able to see the login page of your wireless router.
To Sum Up
If we consider everything we’ve discussed so far, then it can be concluded that accessing the D-Link router IP address is only possible if the web browser is updated and the internet connection is stable. The IP entrée and the antivirus program installed on the PC also play an important role. However, if the situation is still the same as that at the beginning of the post, proceed to reset the router and reconfigure it.