After the Wireless-N WiFi repeater setup, you tried to access the WiFi repeater admin page but you are not able to do so. Or perhaps you’ve forgotten your repeater’s password. No need to worry if your response is yes. Resetting the factory settings will fix all of these issues. Once you reset the Wireless-N repeater you will get the default settings back. Are you amazed how to factory reset the wireless repeater? Well, no worries. In this post, we will discuss the reset process using the two methods.
Methods to Factory Reset Wireless-N Repeater
The procedure to reset the Wireless-N repeater to its factory default settings is straightforward.
Using the Reset Button
Using the Manual Method
You can use any of these methods as per your convenience.
Wireless-N Repeater Reset via Reset Button
The most basic way to reset the Wireless-N WiFi repeater to its factory default settings using the Reset button. If you are not aware of how to factory reset the wireless repeater then follow the steps mentioned below in the exact order to finish the process.
- First of all, power on the WiFi repeater by inserting it into the active wall socket.
- After that, wait for a couple of seconds, until the power LED turns on.
- Now, find the Reset button on the repeater.
- Once you find it, press the button using the sharp pointed object like a paper clip.
- Eventually, wait for a little while and release the button.
In this way, you can reset the wireless repeater to its default settings. Occasionally, a lot of people are not able to perform a factory reset using this method. If you are also one of them then no need to worry. Follow another method i.e. manual method to complete the process.
Wireless-N Repeater Reset via Manual Method
Connect the Networking Devices
First thing first, grab an Ethernet cable and connect the WiFi repeater to the host router. Confirm that the power cable connection is secure. Along with that, also verify that the Ethernet cable you use is not damaged. On the off chance, if it is faulty replace it with the new one.
Run an Internet Browser
Now, power on your smart device and fire up a web browser you like the most. You can prefer any browser such as Google Chrome, Vivaldi, IE, or Brave. Ensure that whatsoever browser you use is updated to its latest version.
Access Repeater Web Page
Next, head over to the link field and type the default web address. Apart from the web address, you can also use an IP address to access the login page.
Fill up the Admin Details
As soon as you hit the Enter key the Wireless-N repeater login window will come into view. Here, input the default username or password. To avoid login errors, be sure that you type the correct login credentials.
Reset the WiFi Repeater
Once you logged in, the Wireless-N repeater dashboard will prompt. Now, go to the Utilities option and select the Reset Factory Defaults button. Subsequently, click on the Confirm option. Wait a few seconds, your wireless N repeater will restart and reset to its factory default settings. Once the reset process is complete reconfigure your WiFi repeater. Take the help of the user manual if you don’t know the wireless-N WiFi repeater setup instructions.
Our guide on how to reset the Wireless- N repeater has come to an end here. We hope that with the help of the hacks mentioned in this article, you will surely be able to reset your repeater to its default settings without any technical issues blocking your path.