If your TP Link WiFi extender is continuously dropping connection, it means that it is of no use and you have to fix this as soon as possible. Don’t worry! Dropping connection issues is not particular with your device. It happens with all WiFi devices.
Dropping internet connection issues typically happens if you haven’t performed TP Link setup process correctly or updated its firmware incorrectly. Apart from this, sudden power outdated while updating the extender’s firmware or setting it up can also be one of the reasons behind “TP Link dropping connection” issue.
But, you don’t have to worry about anything! As you are on this post, you will get one of the topmost fixes to troubleshoot the issue on the fly. Let’s get the ball rolling!
TP Link Extender Dropping Connection
Fix 1: Restart Your TP Link Extender
Yes, restarting or power cycling is one of the most important fixes that is well known for fixing big and small issues with TP Link WiFi range extender. So, scroll down a little and get the instructions to power cycle your TP Link WiFi extender:
Step 1: First of all, you have to disconnect your TP Link WiFi extender from your existing device i.e. the router.
Step 2: Once you are done, unplug your TP Link extender and wait for a few minutes.
Step 3: Now, turn the extender back on.
Step 4: Connect the TP Link device to your existing router.
Step 5: Check your internet connection by accessing tplinkrepeater.net login page using 192.168. 0.254.
Here’s to hope that your internet connection is working fine? What? TP Link extender continues to lose internet connection? Need not to worry! Reset will be the better option to fix the issue. After resetting your TP Link extender, you have to reconfigure it again. Don’t sweat over it! We are here to help! Keep scrolling down to know the process for resetting and reconfiguring TP Link extender.
Fix 2: Resetting TP Link Extender
Note: A wrongly performed reset process will shut down your TP Link extender permanently. So, we insist you to follow the steps provided below to reset the TP Link extender in the exact given order.
Here’s how to reset your TP Link extender:
Step 1: Keep your TP Link WiFi extender plugged in, but do disconnect it from your main router.
Step 2: Press the reset hole on your extender and once found, press it gently using any thin and pointed object.
Step 3: Hold it and a few moments later, release it.
Your TP Link extender resets successfully!
The LEDs on your TP Link extender will blink! As soon as it becomes stable, take the plunge to configure it again.
Fix 3: TP Link WiFi Extender Setup
Here’s how to configure your TP Link WiFi extender:
Step 1: Plug in your TP Link extender. Please ensure to provide a steady power supply to your device.
Step 2: Connect your router and the extender. You can make things happen by making use of a non-damaged Ethernet cable.
Step 3: Launch a web browser of your choice on a desktop or laptop.
Step 4: Enter tp link extender login in the address bar. Take care of typos! Void using the search bar.
Step 5: You will be taken to the TP Link setup page upon hitting the enter key.
Step 6: Provide your extender’s serial/ model number and default login details.
Step 7: Follow the provided TP Link WiFi extender setup instructions in exact given order.
Fab! Your TP Link WiFi extender will be configured shortly.
Now that your TP Link WiFi extender has been configured, you can visit tplinkrepeater.net login page to update its firmware. We give you our words that after updating extender’s firmware it will perform the best for you, like never before.
In a Nutshell
Our article comes to an end! The three fixes provided in this post will surely help you to get the most out of your TP Link WiFi extender. Let us tell you that, those users who have followed the fixes provided in this post and commented that their TP Link WiFi extender is not dropping internet connection. It is working smoothly without giving issues. What is your feedback? Please share with us!